R.M. Mechanical is factory-certified to install and service Rheem equipment for homeowners and commercial clients across Tampa Bay. Florida license CAC1820870.
Rheem systems turn up throughout Tampa Bay in both residential and light commercial settings, and the brand is often paired with Rheem water heating in the same property.
Rheem's Prestige line uses EcoNet communicating controls. As with any communicating system, mixing in a third-party thermostat costs you the modulating capability, so a like-for-like control replacement matters more here than on a single-stage system.
These are the failures we are called out to most often on Rheem equipment in this climate, rather than a general list of things that can break.
A restricted or failed thermostatic expansion valve makes a system run long, freeze the evaporator coil, and cool poorly. It is easily mistaken for low refrigerant, and adding charge to a system with a metering fault makes the problem worse rather than better.
Variable-speed Rheem air handlers run on an electronic board that does not like dirty power. Tampa Bay storms bring surges and brownouts, and we see these boards fail in clusters after bad weather. A surge protector is cheap insurance.
The same salt-air exposure that shortens any condenser's life applies here. On the barrier islands and along the coast we recommend inspection twice a year rather than annually.
Rheem shows up in both houses and light commercial buildings around Tampa Bay, often alongside Rheem water heating in the same property. Commercial Rheem packaged units on small buildings are a regular part of our maintenance work, and the same certification covers both sides.
Rheem installations are permitted and inspected under license CAC1820870. Where a property has Rheem heating and water heating together, we coordinate both so you are not booking two separate visits.
Yes, and most of it is. We take on Rheem systems installed by anyone. The data plate gives us the age and the line, which matters because Endeavor and Prestige equipment needs different diagnostics from the Classic series. Registration status is worth checking before any major repair.
Yes, R.M. Mechanical is factory-certified to install and service Rheem equipment for residential and commercial customers, under Florida contractor license CAC1820870. That covers installation, diagnostics, and warranty work on Endeavor line, Classic series, Classic Plus series, Prestige series.
Rheem parts warranties depend on registration and vary by line. We check registration status before quoting, since an in-warranty part changes the economics of a repair considerably.
TXV and metering device faults. A restricted or failed thermostatic expansion valve makes a system run long, freeze the evaporator coil, and cool poorly. It is easily mistaken for low refrigerant, and adding charge to a system with a metering fault makes the problem worse rather than better.
Rule out the cheap causes before assuming the compressor is gone. Variable-speed Rheem air handlers run on an electronic board that does not like dirty power. Tampa Bay storms bring surges and brownouts, and we see these boards fail in clusters after bad weather. A surge protector is cheap insurance.
We service Rheem equipment throughout our coverage area, including:
Same-day service is usually available. We quote the diagnostic fee before we dispatch.
